Apply online

How to Configure Inbound Numbers

In this article

Introduction

At the end of this article, you will be able to add inbound numbers to your PBX configuration. The article will also assist you with some common uses of the object within your call flow configuration. Should you need any assistance, feel free to contact our support department.

How to Configure an Inbound Number

    1. First, head to the PBX section at the top of the customer portal page, find the Inbound Number Object on the left, click and drag it into the working area.



    2. Open the Component Settings, by clicking the Gear Icon.



    3. Give the Inbound Number Object a Name, then select the number(s) you want to use, and click the right arrow (>) to move them to the included column.



    4. The number(s) will show in the Included Number Column, when ready, click the Save button below.



    5. Once complete, the red glow around the Inbound Number Object will disappear, and you will be able to click the Red Apply Configuration button on the left hand side to save your call flow.



Next Steps to Building a Call Flow

Now that the Inbound Number is configured in the Call Flow, the next step is to build out the call flow to suit your business/personal needs. Below are a few links to articles, that cover common objects that get linked to the Inbound Number.


How to Configure Call Diversions

How to Configure Time Conditions

How to Configure Users and Devices

How to Configure Voicemail

How to Configure Voice Menu (IVR)

Head to Hosted PBX -> Building Your Call Flow in the Knowledge base for more!

A quick search will help you find answers to most of the FAQ's.
If you are unable to find a solution from the knowledge base centre, please contact your service provider for technical assistance.